Headlines
DJMadMatt's New Sonic Project
- Thread starter djmadmatt
- Start date
Ratickle
Founding Member / Super Moderator
djmadmatt
New member
Pix
I have a bunch of pix uploaded to my facebook account. Here is the link. You should be able to see them with no problem.
http://www.facebook.com/album.php?aid=106236&id=534929778
I should have taken a Picture of it yesterday with all the snow on it.
( I just jet get my new Cockpit Cover made so I need to get another couple pix.
I have a bunch of pix uploaded to my facebook account. Here is the link. You should be able to see them with no problem.
http://www.facebook.com/album.php?aid=106236&id=534929778
I should have taken a Picture of it yesterday with all the snow on it.
( I just jet get my new Cockpit Cover made so I need to get another couple pix.
djmadmatt
New member
Thanks!
djmadmatt
New member
You must be ****ing High Johnny. You didn't give **** away. I held back like $1000 cause there was no trailer title and the one motor that was in the boat that was together that you said had 10 hours on it. It was completely grenaded with pistons blown apart and sat with water in all the cylinders for 3 years of and the drive that was on that side is junk too. Big surprise there. Oh and the one crank you sent up, cast and not forged. Heads were all cracked. Engine blocks were rotted out. All the trim pumps were junk. MSD Boxes, Junk, One carb was in 20 pieces in a box. Do I really still need to go on?
Don't bull**** a buyer when selling online. You have no reason to be pissed at all. I bought an abortion. That wasn't what it was "supposed" to be.
Don't bull**** a buyer when selling online. You have no reason to be pissed at all. I bought an abortion. That wasn't what it was "supposed" to be.
djmadmatt
New member
Sorry Ratickle. Not what I was expecting to see posted when I woke up this morning. Nothing like getting snowed and you not slamming the guy that snowed you when it happened. Then 6 months out of the blue, the old owner see's new pics and the 10's of thousands of dollars you sank into it and says something ignorant and ridiculous. I learned my lesson. Attack as soon as you get snowed.
djmadmatt
New member
I got it in the water right after Labor day Last year. I haven't put it in the water this year as of yet because I'm changing the cams to roller and different oil pumps. Ran out of money last year because everything needed replaced. Flat tappet was all that was in the budget.
Just got the new cams, lifters, timing chain covers and springs Friday. So, hopefully this week, I'll pull the motors back out and change the cams and oil pumps. Oh and put on a new drive I got this spring because one was borrowed.
Just got the new cams, lifters, timing chain covers and springs Friday. So, hopefully this week, I'll pull the motors back out and change the cams and oil pumps. Oh and put on a new drive I got this spring because one was borrowed.
DAREDEVIL
Banned
I got it in the water right after Labor day Last year. I haven't put it in the water this year as of yet because I'm changing the cams to roller and different oil pumps. Ran out of money last year because everything needed replaced. Flat tappet was all that was in the budget.
Just got the new cams, lifters, timing chain covers and springs Friday. So, hopefully this week, I'll pull the motors back out and change the cams and oil pumps. Oh and put on a new drive I got this spring because one was borrowed.
I would stick a bigger flame arestor on them too.....MORE AIR,,let them breath !!!!!!!!:cheers2:
DAREDEVIL
Banned
Dont glass scoops, just cut the hatch along the sides and make it higher all the way...maybe 2-3 inches is all u need.
or get a huge diameter Gaffrig flame arestor..call jim there and tell him i send u !
they come in 3 inch hight but suck a lot more air the these on there !!!:cheers2:
Similar threads
