Steve 1
Contributor
Thank you.
Headlines
BRAND NEW CHEETAH CAT - Please Respond!
- Thread starter Steve2
- Start date
Thank you.
03darkshadow
New member
where is the CG of my jeep? can i hang it by the windshield wipers from a tree to find it? thanks.
but as for the thread, i thought a 35 would be nice, because like everyone else said, its not too big where you'd need special permits, easy around the docks and could run real good with moderate (not 1000+hp) engines. whatever you decide to do keep us up to date with pictures, your builds are always interesting.
but as for the thread, i thought a 35 would be nice, because like everyone else said, its not too big where you'd need special permits, easy around the docks and could run real good with moderate (not 1000+hp) engines. whatever you decide to do keep us up to date with pictures, your builds are always interesting.
Offshore Ginger
New member
CIGRUNNER 38 , I, think you have just about worn out your welcome here and may we bid you a very nice farewell.............:seeya:
Offshore Ginger
New member
so who is he ?
Steve 1
Contributor
Sir thank you. The 35 is road legal and will run warp speed with 700's we have to get an insurance agent to set some guidelines to keep that aspect realistic. These boats have a great ride as well.
DAREDEVIL
Banned
Offshore Ginger
New member
Steve 2 :rofl::rofl::rofl: would you please clean the $hit out of the isle so we could at least walk thru and ........... get a breath of fresh air and not step knee high in $hit .....shuhhh...... just kiddin:rofl::rofl::rofl:
Steve 1
Contributor
I will let you know tomorrow soon as my info gets checked. Here is the thing he made a post then deleted it again and again,that is like the old pastor said cast a hand full of dust into the wind then try to get it all back. put the twisted info out then retract the lie.
That is why you have to treat this as an assault pure and simple.
DAREDEVIL
Banned
Boat is on the way ...hurry up cleaning..LOL :toetap05:
Offshore Ginger
New member
Steve shoot me a pm or E mail your always welcome at my house .
Steve 1
Contributor
Artie Thanks.
Steve 1
Contributor
LOL this runnypants is too damn dumb to just go away.
DAREDEVIL
Banned
LOL,i know.....but who gives a f... what he does ????? :willy_nilly:
Steve 1
Contributor
He needs some remedial reading comprehension on about the 4th grade level for starters.
Steve 1
Contributor
cigrunner38
Registered
Join Date: Feb 2010
Posts: 13
Quote:
Originally Posted by Steve 1 View Post
On a race boat everything was considered ,Yes the engines are very much looked at in the design and on the drafting table as I do not ever Build Generic hulls and decks everything is specific to use and Power about the boat,I do not use any formula Per say but we had a time consuming method for this analysis that was very accurate. the weight of the fuel and crew is easy to establish in the cheetahcats
I keep the fuel around the CG so as it goes that effect is minimized like a seesaw with weight placed over the fulcrum has nil effect on the riders.
Forktruck? from the transom no problem.
==========================================================
I would enjoy knowing what that method is. Could you explain it?
From a picture of my boat can you tell me where the cg is? I'm building a lift so this is interesting to me. TY
cigrunner38 is offline Report Post Reply With Quote
Christ a friggin picture. I told him to move the Fat Woman!
Registered
Join Date: Feb 2010
Posts: 13
Quote:
Originally Posted by Steve 1 View Post
On a race boat everything was considered ,Yes the engines are very much looked at in the design and on the drafting table as I do not ever Build Generic hulls and decks everything is specific to use and Power about the boat,I do not use any formula Per say but we had a time consuming method for this analysis that was very accurate. the weight of the fuel and crew is easy to establish in the cheetahcats
I keep the fuel around the CG so as it goes that effect is minimized like a seesaw with weight placed over the fulcrum has nil effect on the riders.
Forktruck? from the transom no problem.
==========================================================
I would enjoy knowing what that method is. Could you explain it?
From a picture of my boat can you tell me where the cg is? I'm building a lift so this is interesting to me. TY
cigrunner38 is offline Report Post Reply With Quote
Christ a friggin picture. I told him to move the Fat Woman!
Steve 1
Contributor
Another Zinger
cigrunner38
Registered
Join Date: Feb 2010
Posts: 13
Quote:
Originally Posted by Steve 1 View Post
Why don't you just single sling the boat to find the CG ?
=======================================================
how do you do that and not damage the boat?
I'm thinking your formula would be easier. What exactly do you look at to calculate it?
GEE I guess use a Nylon Sling and not a steel cable or battleship chain Also reading is a very Cool thing AS There is NO Formula !!!!!!
cigrunner38
Registered
Join Date: Feb 2010
Posts: 13
Quote:
Originally Posted by Steve 1 View Post
Why don't you just single sling the boat to find the CG ?
=======================================================
how do you do that and not damage the boat?
I'm thinking your formula would be easier. What exactly do you look at to calculate it?
GEE I guess use a Nylon Sling and not a steel cable or battleship chain Also reading is a very Cool thing AS There is NO Formula !!!!!!
