Just took delivery a little ways back... '09 Deckboat from Domn8er powered by an Ilmor. Now we just need to get rid of all this white $hit on the ground and get a little warmer weather.
A car receiver and tuner was installed just to the left of the tv. and the wood was painted lacker black. I made new speakers to go into the slots the original speakers went into to. The new speakers are infinity 6/9 and a 10" sub on both sides. It sounded great until I blew the 6/9's up.
Parts needed: Sawzall, Jig saw, Tequila, amps, CAP, tv, speaker wire, amp wire and other stuff that I can't remember right now.
Parts needed: Tequila, Sawzall, Tequila, Jig saw, Tequila, amps, Tequila, CAP, Tequila, tv, Tequila, speaker wire, Tequila, amp wire, Tequila, and other stuff that I can't remember right now except for Tequila.
My 288 Sunsation is at the shop getting a Raylar 525 Kit,Big Tube headers, and a whipple reprogrammed ECM installed.
My Pachanga just had Duel Imco full hydraulic steering and Tabs installed. Now it's at the shop with the Sunsation waiting to get the 496 exhaust off the Sunsation!
A car receiver and tuner was installed just to the left of the tv. and the wood was painted lacker black. I made new speakers to go into the slots the original speakers went into to. The new speakers are infinity 6/9 and a 10" sub on both sides. It sounded great until I blew the 6/9's up.
Parts needed: Sawzall, Jig saw, Tequila, amps, CAP, tv, speaker wire, amp wire and other stuff that I can't remember right now.
I think it is a 30. I originally bought the 32 but it was too wide for what I needed to do. The Toshiba that is in there now has a built in DVD and was able to mount my Car Stereo right beside the TV.
I still have my booze cabinet. In my Cary, from left cabinet to right cabinet, I had the electronics panel, Home stereo gear, tube tv and booze cabinet. I pulled out the home stereo gear and tube tv. Then cut the post out which had separated the two. Fabricated the mounting system for the 4 amps in the side the tv had originally gone. On the other side is a 10 farad Cap. I made the TV mount using a 1" cut to fit piece of plywood. I made several sanding and bondo passes on the plywood then painted high gloss black, trying to match the trim. At the same time I put new cable tv wire and added a drop in the aft cabin, fwd cabin and top. It turned out good for me.
I will tell you this. When they put all that stuff in at the factory, they intended it to stay there.
Next time I'm at the boat I'll take some good pics of the finished project.
If anyone is looking to upgrade their GPS my color Northstar 6100i is listed in the STUFF forum. Has the satellite weather option and the platimum south florida chip.
Gutted the berth & having new cushions & vinyl done, replacing the carpet hull covering w/ suede, phase 1 of stereo system, all new led lights, & new snap in carpet. Thats all the budget allows for 08-09.
Will do... Only had some break-in time while picking her up. Didn't open it it too much. During their water test, they hit 84 with more in her and that was on glass, so I'm sure when she packs a little air, she'll see a little more than that. I figured it wasn't too bad for a 'family boat' (my excuse to the wife) :biggrinjester:.