Uneven Trim Rams

[Seafordguy]

I have one trim ram on a set that is about 1 inch farther out than the other. Can I remove one of the lines and push it back in?

If so which one? The one at the end of the ram or the one closer to the transom?

 

[Sydwayz]

I would not remove on one of the lines. Then you have fluid mess & bleeding issues.

If they are all attached to the boat and you are about to install the drive, just use the weight of the drive with the pin in the "longer" trim ram to push that ram in a bit, and the other will push out at the same time.

 

[Seafordguy]

I would not remove on one of the lines. Then you have fluid mess & bleeding issues.

If they are all attached to the boat and you are about to install the drive, just use the weight of the drive with the pin in the "longer" trim ram to push that ram in a bit, and the other will push out at the same time.

Perfect.

Thanks.....

 

[old377guy]

yeah, like Brian says