Thad Allen's Apache + The Birth of the Cheetah Cat

[Offshore Ginger]

Do you still keep in touch with anyone that has any of your tooling? Great stuff, thanks

SLAP*#**++ AND GO TO SLEEP :bump::bump::seeya::rofl::rofl::rofl: Dave , i will give you a call tomorrow..................and what about that 20 ?:seeya:

 

[Steve 1]

Do you still keep in touch with anyone that has any of your tooling? Great stuff, thanks

Yes we still talk they are like family, Hey thanks! BTW when I built that the Next one was in my head.

 

[McGary911]

Steve, thanks for taking the time to scan all these pics and share a sick amount of knowledge. This thread will be a great reference for years to come. I'm really enjoying checking it each day to see what you've posted for us to see....

 

[Steve 1]

Steve, thanks for taking the time to scan all these pics and share a sick amount of knowledge. This thread will be a great reference for years to come. I'm really enjoying checking it each day to see what you've posted for us to see....

Sir it is my pleasure and I thank you for the nice comments and you are very welcome.

 

[Steve 1]

Here is the Cheetahcat console base it required a multi piece mold, this picture was taken in one of our 43 foot cats.

 

[Offshore Ginger]

Here is the Cheetahcat console base it required a multi piece mold, this picture was taken in one of our 43 foot cats.

Steve in your pics it looks like you are showing the botton side of the console and could you please show a topside view just to get a good picture of what the console really looks like ?

 

[Steve 1]

Steve in your pics it looks like you are showing the botton side of the console and could you please show a topside view just to get a good picture of what the console really looks like ?

Coming up, the top was hinged and had a surface set for Raytheon electronics if that was called for Plus three could sit behind the windscreen on that.

 

[Steve 1]

Filling in some pictures,Here is the foredeck getting finished for molding this version had a round hatch for a windless between the two small fairings ,there were a couple more variants planned these dropped in like a hatch would and then was glassed 360.

 

[Steve 1]

I had sanding sticks for every piece of the job, This guy caught on very well,we sanded with silicon carbide paper and talcum powder instead of water.

 

[Steve 1]

The Mold sides are off here and the Hatch Grid/Stringer system is going in, the liner sides are masked up for bonding work,There is a storage locker that goes up in the front behind the bulkhead. The plywood work walkway up the center is the exact size of the hatches and is a critical dimension,Every compartment was to get a finished liner.

 

[Steve 1]

The Bonding is done and the forward Locker is glassed in, this supports the floor hatches as well,The Fuel tanks have been placed and need bolted then some Foam again we made them round for long term survivability..

The mold had Two Axles as the center of gravity changes with the sides mounted and I wanted to keep this balanced so one man could turn it. Getting close, the floor hatches done now and are a no measure needed with the holes pre-located and even the countersink molded ,the rigger just needs a drill.

 

[glassdave]

I had sanding sticks for every piece of the job, This guy caught on very well,we sanded with silicon carbide paper and talcum powder instead of water.

I have never used that technique with talcum powder. How does that work and what it the advantage? Was that used just for fairing/bulk sanding? Thats interesting . . . .


Hey have you ever kept epoxy tools (rollers, spreaders,etc) in vinegar? Heard it keeps epoxy from curing and makes cleanup easy. Never tried it myself just ran across that on another site.

 

[Steve 1]

I have never used that technique with talcum powder. How does that work and what it the advantage? Was that used just for fairing/bulk sanding? Thats interesting . . . .


Hey have you ever kept epoxy tools (rollers, spreaders,etc) in vinegar? Heard it keeps epoxy from curing and makes cleanup easy. Never tried it myself just ran across that on another site.

I have kept epoxy tools for a year in a tight lid metal bucket (I had a lot of weird bent brushes and special rollers) in acetone ,I have never tried Vinegar but it makes sense when looking at the PH .the talcum powder provides like a lube and keeps the abrasive clean and free from getting packed ,we use a air hose to keep it clean. Gelcoat clean up on clothes try a spray of armor-all mag wheel cleaner then wash, I always get it all over when cleaning up the spray equipment with acetone,Thanks for the vinegar tip.

 

[Steve 1]

We are pulling the cat today, wood is on for the upholstery guy and he has started on the seats and console,some cleanup and rig ,I will get a pair of Mercurys from their dealer here Al Boom, he was a good guy to deal with.

 

[Steve 1]

Here is a picture of the fishing boat ,Everyone liked the cat and It even ran "S" class in one of the National races here.I will dig out more pictures of these.

 

[cosmic12]

In that last pic it looks as though the tip of the right side is missing, is it or is it just the pic?

Very cool looking fish boat.

 

[cosmic12]

OK,OK,...Port siide

 

[Steve 1]

OK,OK,...Port siide

No LOL the boat is exactly symmetrically that is black Paint on the inside of the sponson's, the Arabians painted the bows of the old Dhows in that fashion there was a famous one called the Kuwait boom the Iraqis burned when they were there.

 

[Steve 1]

I would say its the left side of the boat ?? but i guess thats where the 50 cal. maschine gun sticks out !!!!! LOL :cheers2:

Gray one in the back gets the .50 but being that came from my shop it sits on a polished stainless mount.

 

[Steve 1]

This is the reason I painted the sponsons in that manner it was out of respect for my hosts.Here is what I was copying from their distant past and bringing forth ,look up on the bowsprit.