Headlines
Talon Cats?
- Thread starter waterboy222
- Start date
ProMod
New member
Up to 900 hp per side they actually run approx the same top speed #s as a similar size late 90s to mid 2000 design #6 -36' pleasure Skater or Norteck,140mph or so depending on prop.
When you start to put 1000+ hp per side to these hulls that,s where the Talons inefficiency high prop slip rears her head,the mph spread goes 10 to 15 mph between the Talon and the Skater speed wise.
We run 1300hp + per side in our 377 and fully loaded run mid 150s every day of the week in a very short distance,105 to 150mph a click less than 10 seconds stop watch tests.
In a few weeks we plan on documenting a 160+ mph run by adding larger props and a few lbs of boost if needed.
For this hull that's moving pretty well, by Skater /MTI standards a total slug power to power.
The 377 pod hulls don,t handle the rough water near as well as the skater but up to 3' s or so I prefer the over all ride of the Talon to both my neighbors 36' Skaters .
If you want to be racer X this is not the hull, but as a fast pleasure bay boat she makes for a great ride!
cosmic12
Founding Member
So whatever happened to the Border Line boat? or is that the same boat? the grafics look kinda the same. I remember that one had a mid cabin saw it at Bonnie Castle a few times.
Last edited:
2scoops
New member
Thanks Mike S. I assume that is about the speed of the cut down Nina Ross boat? How does the Double R boat with the triple X motors compare? Come on guys, Help an outboard guy out!
catastrophe
Registered
Borderline had triple OB.
Ripped them off , added 900 a side and it became UNITED NATIONS.....same boat
cosmic12
Founding Member
Thats kinda what I thought, Thanks
nthdegree
New member
Before they repowered it with Mercs, Lexan 4 man Canopy, Latham Steering, Tie Bars & Throttles, VDO & Gaffrig gauges, Apollo Aviation GPS, Alpine Stereo CD, Intercom, 4 Bucket Recaro type seats, 3 CMC mechanical S/S engine lifts, 2 x 150 US Gal Tanks. Myco custom tri-axle trailer, 45’ long overall. 42.6 Total Hours since new. Last run 1995. Fresh water only. ~5308 lbs without engines. Mint Condition.
Approximate performance figures when repowered.
# P.S.HP Mfg Wt. Total Wt Lbs/HP ~ Speed
3 375 Offshore OMC @ 600lb 7108lb 6.3:1 112 MPH
3 300HP Merc @ 470lb 6718lb 7.5:1 102 MPH
3 330XHP Merc @ 475lb 6733lb 6.8:1 108 MPH
4 330XHP Merc @ 475lb 7208lb 5.5:1 120 MPH
3 275HP Merc @ 375lb 6533lb 7.9:1 100 MPH
4 275HP Merc @375lb 6808lb 6.2:1 114 MPH
3 275 Verago Merc @635lb 7213lb 8.7:1 94 MPH
4 275 Verago Merc @635lb 7848lb 7.1:1 107 MPH
2 525 MC Merc @1201lb 7710lb 7.3:1 104 MPH
2 575 MC Merc @1160lb 7630lb 6.6:1 110 MPH
2 1075 MC Merc @1720 lb 8750lb 4.1:1 130+ MPH
Attachments
Geronimo36
Charter Member
How many non-pod Talons were made?
From what I hear the pod Talons ride hard.
From what I hear the pod Talons ride hard.
cowisl
New member
Looks like it needs some dialing in
glassdave
Founding Member / Competitor
I actually have that boat in my shop right now (Snakeman) I just got done with all new tanks and surrounding structure/floors/dash everything . Getting ready to re do the entire transom and tunnel for quads (needs two pods in tunnel). Maybe it can catch a Talon now
2scoops
New member
Thanks for the info, It does seem like it could use a little fine tuning. That is a great deal for a boat that size but a little more MPH would be nice. I would think the X powered boat with the torque of the 3 liters would smoke a 2.5 powered one.
stainless
New member
I actually have that boat in my shop right now (Snakeman) I just got done with all new tanks and surrounding structure/floors/dash everything . Getting ready to re do the entire transom and tunnel for quads (needs two pods in tunnel). Maybe it can catch a Talon now
Nice! I know back then it was a heavy biotch! :sifone: Post some pics when you get a chance!
stainless
New member
I agree! should be running faster than that. With 2.5's we were at least 110mph (and 116 on the magic lake x water!)
glassdave
Founding Member / Competitor
I will be doing a thread on the build. Doing some cool stuff with it. tell ya what for a 36 its one big azz boat.
stainless
New member
Cool!:USA:
waterboy222
New member
Just bringin this thread back around because another Talon just hit the market. This ones even cooler than the last!
http://www.offshoreonly.com/classifieds/custom_talon-o30426-en.html
And at $99000, it shouldnt last very long. Hes about $20k higher than my price range..Slick lookin ride though!
http://www.offshoreonly.com/classifieds/custom_talon-o30426-en.html
And at $99000, it shouldnt last very long. Hes about $20k higher than my price range..Slick lookin ride though!
Attachments
RacerChip
Sponsor
Please feel free to call me. I worked at Talon when the boat was developed and had the oppertunity to race both the 25 and 37. I am currently working @ STATEMENT Marine and yes the Flowmaster Talon is here. It has been converted to a pleasure boat and is currently available. Gary Armington (Owner of Talon) is a very close friend of mine and I may be able to put you in touch with him as well. Chip Fendt 941 586-1808.
