Somebody give me a reason

Well, I made it there, the roads were nasty. Shop was borderline freezing due to a thermostat failure so good thing I went.

Had to uncover the b1tch to make sure nobody re labled it Wold Champion non running project team.
 

Attachments

  • progress 003.JPG
    progress 003.JPG
    62.2 KB · Views: 3
  • progress 005.JPG
    progress 005.JPG
    57.6 KB · Views: 3
This is how it started out about 12 months ago after sitting out a season due to catastrophic failure.
 

Attachments

  • 011.JPG
    011.JPG
    93.5 KB · Views: 7
  • bilge 003.JPG
    bilge 003.JPG
    132.6 KB · Views: 7
  • plant 002.JPG
    plant 002.JPG
    83.2 KB · Views: 9
A few from today.
 

Attachments

  • progress 009.jpg
    progress 009.jpg
    65.3 KB · Views: 8
  • progress 007.JPG
    progress 007.JPG
    97.4 KB · Views: 9
  • progress 006.JPG
    progress 006.JPG
    95.4 KB · Views: 12
Doing something a little different with the dash, it should look fairly cool when I'm done.

Enough motivation for one day, I'm off to the fridge.:26:
 

Attachments

  • 008.JPG
    008.JPG
    122.8 KB · Views: 10
  • progress 008.JPG
    progress 008.JPG
    87.6 KB · Views: 4
  • plant 015.JPG
    plant 015.JPG
    129.9 KB · Views: 12
This is how it started out about 12 months ago after sitting out a season due to catastrophic failure.

What does it look like now. I would not be sleeping if it was apart that long.

Will a couple teaser pix help?

brown boat 2 rs.jpg

Brown cig stern.jpg

I know how tight it is. Need to be a gumby. Just do it, Keep on making progress.
 
Sbd. went kablooey, BIG kablooey, the crank came out in 2 peices.


Port engine was pretty tired. I still have it for a spare. The bilge along iwth a lot of other hardware in the bilge needed refinished, the old wiring was a nightmare...ect.. she needed a makeover.
 
Sbd. went kablooey, BIG kablooey, the crank came out in 2 peices.


Port engine was pretty tired. I still have it for a spare. The bilge along iwth a lot of other hardware in the bilge needed refinished, the old wiring was a nightmare...ect.. she needed a makeover.

well, if you didn't duct tape the throttles wide open to the dash, they might live a little longer :26:
 
well, if you didn't duct tape the throttles wide open to the dash, they might live a little longer :26:
The Stinger that I used to have had velcro so that you could keep the steering in place (I still say no way) I called it the polish autopilot and never used it.
Maybe Tony needs to go get a rum once in a while.:sifone:
 
Back
Top