Rat Rod---------?????

[cosmic12]

Well I finally got a few days off and have been out in the garage beat'n and a bang'n with sparks fly'n pizz'n off the wife.
the top is getting there and I started the door frames today.
Really sucked having to widen the roof almost 10 inches,(remember this was a 4 door to start with.

 

[cosmic12]

couple more

 

[imco offshore]

thats really cool , i,m almost done with my 65 ss (chevelle) just have to put the interior back in,,,, THEN my rat a twin 350,s 49 ,,2 door broham hudson 700r4+overdrive 1968 jaguar rearend, the drive line has already been fitted ,and removed ,,all has been rebuilt and ready to reinnstall,,,but i,m not real good with body work, so i saved the dredded for last,,, keep the pic,s comming it gives me hope and motovation thanks george jr.

 

[cosmic12]

thats really cool , i,m almost done with my 65 ss (chevelle) just have to put the interior back in,,,, THEN my rat a twin 350,s 49 ,,2 door broham hudson 700r4+overdrive 1968 jaguar rearend, the drive line has already been fitted ,and removed ,,all has been rebuilt and ready to reinnstall,,,but i,m not real good with body work, so i saved the dredded for last,,, keep the pic,s comming it gives me hope and motovation thanks george jr.

Get some pics of them on here for us!!!! I really want to see the Hudson.
What does TWIN 350 meen?
I know all about the motovation thing, sometimes I look at my "puzzle" and wonder WTF am I doin here with this junk? and then I spent a day on it and make just a little progress like the upper door frame I just tacked togeather and see the huge change it made and I am all fired up again.
I just want to get the top done so I can get it channeled and down in the weeds and then I will really excited .

 

[Perlmudder]

man that thing is sweet! always thought they were just super cool lookng!

 

[imco offshore]

Get some pics of them on here for us!!!! I really want to see the Hudson.
What does TWIN 350 meen?
I know all about the motovation thing, sometimes I look at my "puzzle" and wonder WTF am I doin here with this junk? and then I spent a day on it and make just a little progress like the upper door frame I just tacked togeather and see the huge change it made and I am all fired up again.
I just want to get the top done so I can get it channeled and down in the weeds and then I will really excited .

i,mnot trying to be funny,,, but twin means 2,,,two yes two engines!! the hudson has a hood like the old eldorados had and i put two 350.s in line UNDER the hood,, i,ll put some pic,s up i,v got to move some things out of the way it,s been done about a year now ,,so you know what gets piled up on that stuff, :driving:

 

[imco offshore]

heres come pic,s

 

[imco offshore]

chevelle

 

[cosmic12]

HOLY CHIT!!!!!!!! thats just way to cool!!!!! It really fits?
Man you gotta get that done and driveing, I hope you plan on lowering that lid.

 

[imco offshore]

it,s already been all put together,, the motors sound like a lamborgini, v-16 two sets of headers going into one,,really cool,, it,s my winter project, i have a body man starting to work on it 1st of dec, he said it will be done 1st feb running,

 

[Dude! Sweet!]

it,s already been all put together,, the motors sound like a lamborgini, v-16 two sets of headers going into one,,really cool,, it,s my winter project, i have a body man starting to work on it 1st of dec, he said it will be done 1st feb running,

Awesome! My buddy saw that tube chassis twin motor car (from Hot Rod a couple months back) up on Mulholland last weekend. That's a wicked brand of craziness! :sifone:

 

[cosmic12]

it,s already been all put together,, the motors sound like a lamborgini, v-16 two sets of headers going into one,,really cool,, it,s my winter project, i have a body man starting to work on it 1st of dec, he said it will be done 1st feb running,

Will the back motor be inside or under the cowel?
That is neat ride for sure.
I wanted to try 2 inline 6's side by side thought that would have been cool because the car is so wide now but couldn't think of any cheap way to hook'em togeather into one tranny.

 

[Scarab KV]

These are some pretty cool projects.

 

[Ratickle]

That's really sweet George.......


You should make a boat with the same setup and tow it around with that mean bastage....:sifone:

 

[MOBILEMERCMAN]

i,v got to move some things out of the way it,s been done about a year now ,,so you know what gets piled up on that stuff, :driving:

Piled up ...Your not kidding.. I see why you are selling off stuff.


How many things have you found you forgot about?.:rofl:

Cool cars non the less.

 

[Scarab KV]

Piled up ...Your not kidding.. I see why you are selling off stuff.


How many things have you found you forgot about?.:rofl:

Cool cars non the less.

Looks like my garage and basement since we moved half of the store home.

 

[imco offshore]

Piled up ...Your not kidding.. I see why you are selling off stuff.


How many things have you found you forgot about?.:rofl:

Cool cars non the less.

i found an edger,,,a palet of hair of the dog...all the tools to refill shot gun shells.....lolol that is a three car garage on the house we can,t get in...the shop is 26x36 and can barelly get the chevelle in ,,, and it has lathes,drill press,,7ft band saw..too much to mention,,that y we are selling off everything this winter , and in feb, i,m calling in a dumpster,and someone is going to get a lot of stuff. one of my winter honey does,,,:USA:

 

[imco offshore]

Will the back motor be inside or under the cowel?
That is neat ride for sure.
I wanted to try 2 inline 6's side by side thought that would have been cool because the car is so wide now but couldn't think of any cheap way to hook'em togeather into one tranny.

i had to pound out for the bellhousing and distributor,, but it,s all up front on a streched camaro clip (34in) ,i,m going to try to bring it to biloxi,

 

[cosmic12]

More progress............
The old nasty front end is finally gone, it had to be 500 lbs.
In it place is a 47 Ford axle and spindles that now have late model GM disk brakes, I split the wish bone and put on a set of 1/4 eliptical springs and got a nice ride hight.

 

[Biggus]

That's gonna be a cool ride!