Length of Bravo Drive

[MattBMiller]

Anybody know distance from Crank C/L to the Propshaft C/L on a Bravo off the top of their heads??

 

[Mr Gadgets]

I just ran out to the shop.. never measured it.. But it looks to be 21.5", best I can tell with the tape measure.

Hope that helps.
Dick

 

[MattBMiller]

Thanks!

 

[Blue Thunder]

I made some x dimesnsion adjustments over the winter and did a lot of reading on the subject. The concensus was the crank cl to prop cl was 22.25" on a standard bravo.

 

[Trim'd Up]

I measured mine not long ago and I came up with about 21.5" too. Not terribly scientific though, just a tape while it was laying on the ground.

 

[klaw]

here is a drawing I found

 

[Ratickle]

here is a drawing I found

Nice find. Thanks.

 

[klaw]

I did a pdf to autocad conversion and got it in the right scale if anyone needs it in autocad let me know

 

[MattBMiller]

Good find indeed

 

[insanity]

There is a conversion chart in an install book I have. I'll scan a copy of it and post it as well. Very informative.

I did a pdf to autocad conversion and got it in the right scale if anyone needs it in autocad let me know

I would like a copy. I'll pm you my email address.

 

[Blue Thunder]

Great info! 21 13/16" it looks like. Thanks klaw, that is helpful.

BT