INFO for all to chime in

[DAREDEVIL]

What do u guys think of a 33 staggered with 700+ HP and arneson drives ???

Would it kick a$$ or no ? LOL :sifone:

 

[MOBILEMERCMAN]

I think a 33 is too short to stagger.. I do like the side by side with Arneson's tight. That would be a real nice set up.

 

[DAREDEVIL]

I think a 33 is too short to stagger.. I do like the side by side with Arneson's tight. That would be a real nice set up.

Jim, all 33 PP's race where staggered and ran fine with #4/5's and even Bravos , all on boxes ..so i thought Arneson conversion asd6 would be cool ?!

Explain why u think its to short though..i like to hear.

 

[MOBILEMERCMAN]

I don't doubt they ran well. I prefer not to need boxes and it is my opinion not to stagger anything less than 38.

 

[DAREDEVIL]

I don't doubt they ran well. I prefer not to need boxes and it is my opinion not to stagger anything less than 38.

Oh, ok..i just think the look cool and perform well...just don't know how they would do on a 33 PP;

 

[DKwestern]

I think it would work (and be badazz). Props are around same distance from transom as SSM #3/4 on boxes, and I would think ASD is lighter as well. I've honestly never heard of an app. where Arnesons don't work, and usually work noticeably better.

 

[MOBILEMERCMAN]

I guess it is a toss up staggered with the ASD6 or side by side with the 8's turned in. I would go with the 8's turned in.

 

[DAREDEVIL]

I guess it is a toss up staggered with the ASD6 or side by side with the 8's turned in. I would go with the 8's turned in.

PP all should turn in , even on asd 6 staggered !!!! and they are enough to hold 700+ as well ( easy ) !!!!!!!!!!

boat should 100+ easy also..

We'll see .mhhhh:sifone:

 

[DKwestern]

he means asd8's angled in so the props are close to each other, while the engines are side by side. Not talking prop rotation.

 

[DAREDEVIL]

he means asd8's angled in so the props are close to each other, while the engines are side by side. Not talking prop rotation.

OH..lol..ok..but i think staggered is better since all PP's are light in the bow !!!!!

Sorry Jim,,,kind of missunderstood u there..lol:cheers2:

 

[Davidmnc]

Accuse my ignorance with this question. What advantage do arneson drives give?

 

[DAREDEVIL]

Accuse my ignorance with this question. What advantage do arneson drives give?

Hold up the power , trouble free,,,set back with out the weight , tranny in the box, running SSM props and act like SSM , or better ( surface drives )
So in my opinion ,,,i will buy a staggered PP and stick some arneson on it,,then i can let u all know if it made a differents and i bet it will to the better....handling , eccelaration and top speed !!!!!!!

Gonna race it of coarse..maybe build a new one. don't know yet :sifone:

 

[DKwestern]

surface drive, no lower dragging in water, no 90 degree gears eating horsepower (more power to the water), better props over bravos, lighter?, more reliable less moving parts.

 

[DKwestern]

typing at same time Daredevil:driving::driving:

 

[DAREDEVIL]

typing at same time Daredevil:driving::driving:

LOL...we think a like...oh chit :ack2::willy_nilly::sifone:

 

[Ratickle]

LOL...we think a like...oh chit :ack2::willy_nilly::sifone:

I think he just muttered the same thing.......:sifone:

 

[DAREDEVIL]

I think he just muttered the same thing.......:sifone:

 

[DAREDEVIL]

Nobody else is going to chime in here ????????

Ok, what would be if they would re-open PP and start building boats again, how many u think would like this ??????? :sifone:

 

[POWERPLAY33]

I think it would be a sweet setup! I run hard through some rough water often and really would like to get the feel of a staggered 33. Seems like it's just what it needs... :cheers2:

 

[302sport]

if you could find some arnesons i have the boat to use as a test boat!!!