Dumb bed frame question

[DonziGirl]

Where can I just get a bed frame that's just the legs and cross bars? Tony keeps telling me he's going to build me a bed frame and I've given up. In hopes that I'll eventually get a headboard built, I'd like to at least just get a frame some place so that I can get the bed off of the floor.


Any idea where I would get one?

 

[Sea-Dated]

Where can I just get a bed frame that's just the legs and cross bars? Tony keeps telling me he's going to build me a bed frame and I've given up. In hopes that I'll eventually get a headboard built, I'd like to at least just get a frame some place so that I can get the bed off of the floor.


Any idea where I would get one?

Any furniture store should have some....

 

[DonziGirl]

I'd prefer to go get it at a store. I don't really want to buy anything online.

 

[Davidmnc]

Where can I just get a bed frame that's just the legs and cross bars? Tony keeps telling me he's going to build me a bed frame and I've given up. In hopes that I'll eventually get a headboard built, I'd like to at least just get a frame some place so that I can get the bed off of the floor.


Any idea where I would get one?

Any funature store should have one.

Or you could try these guys.

http://www.bedframeparts.com/

 

[DollaBill]

You really are a "princess" aren't you? LOL. Next thing you'll want running water in the house

 

[clayinaustin]

You can find the "rails" at any mattress store.

 

[Chris]

Sam's Club.

 

[DonziGirl]

You really are a "princess" aren't you? LOL. Next thing you'll want running water in the house

I know I'm nothing but trouble. Running water would be nice though - those buckets get awfully heavy :03:


Tony's had his mattress on the floor for about 2 years now and I'm reaching my limit.

 

[Tony]

Unpatient wench! I told her I would cut and weld up something cool just for her once I had the free time. I had in mind a headboard with the Donzi "Z" logo done in a swirly etched clear coated iron, complete with clever props atop all 4 bedposts.

Well now that shees *****ing, Im gonna buy the old couch from Bobcat and make her sleep there.

 

[fund razor]

Should be pretty cheap too. Just the rails and no headboard.
He can still make a cool headboard?

 

[DonziGirl]

Unpatient wench! I told her I would cut and weld up something cool just for her once I had the free time. I had in mind a headboard with the Donzi "Z" logo done in a swirly etched clear coated iron, complete with clever props atop all 4 bedposts.

Well now that shees *****ing, Im gonna buy the old couch from Bobcat and make her sleep there.

1. you were not going to make it anything to do with a Z. Plus, I lilke the classics not the Z series.

2. I've been very patient. It's been over two years I think. Definitely a long time. Patience is not one of my virtues.

3. You never get free time.

 

[DonziGirl]

Should be pretty cheap too. Just the rails and no headboard.
He can still make a cool headboard?

I would think so. All I want is to get the freaking bed off of the floor. that's it! I wouldn't think that would be too much to ask. :lurk5:

 

[fund razor]

So...anywho..... what power/drive combo does he run in the 28?

 

[Tony]

fishing again ehhh??


260's, might go 60....fingers crossed!

 

[fund razor]

fishing again ehhh??

260's, might go 60....fingers crossed!

Me too.
Want to leave plenty of room to work in there. :sifone:

 

[DonziGirl]

I heard a rumor about your engines fund

 

[fund razor]

Must have been my empty wallet talking, my wallet hates the boat.

 

[Bobcat]

damn I get thrown under the bus, that couch is now in the basement of the building next to the smithsonian, I was told it was on the short list

 

[FULL FORCE]

You never get free time.

Sure he does...he just spent it in Florida!

 

[fund razor]

Sam's Club.

I was there at 7:30 this morning and Sam's had some seemingly decent ones for $35.24.
No price ends in 99 at Sam's so that you feel like you are getting a deal based on some scientific savings formula.