Coosa or Starboard, where to buy?

[Trim'd Up]

Hey fund, I think I have a piece of 1/2" divynycell h80 with 1 layer of 1708/epoxy on each side. I will measure it if your interested. It is over 4' long but I am not sure if it is 2' tall. Do you need exactly 2' tall?
Chad

 

[fund razor]

The area that I will eventually "cap" is 31 inches wide from stringer to stringer and about 16 inches high at the deepest point, at the V.
Kind of shaped like home plate. Roughly the size and shape of one end of the belly tank.

I mean, it would be cool to put a non-wood product between the tank and the wood... and that outer layer will go from stringer to stringer.

 

[ChiefApache]

The area that I will eventually "cap" is 31 inches wide from stringer to stringer and about 16 inches high at the deepest point, at the V.
Kind of shaped like home plate. Roughly the size and shape of one end of the belly tank.

I mean, it would be cool to put a non-wood product between the tank and the wood... and that outer layer will go from stringer to stringer.

Rob might have a contact for starbord. Call him 440-413-3589.

 

[fund razor]

Rob might have a contact for starbord. Call him 440-413-3589.

I will call him and say hi.
I was looking for the coosa type stuff.... but went with wood.

 

[fund razor]

Thanks for the input guys. I learned alot as always.

Thanks for the heads up on the epoxy vs resin issue Dave. I got some more coaching on the side.

I am going with resin over wood.

This thread was helpful, thanks again.

 

[Geronimo36]

Post some pics for us!!