AFR wide band

[ICDEDPPL]

What do you guys use? a gauge (s) or something handheld?

I was looking at http://cgi.ebay.com/ebaymotors/AEM-...rQ5fTruckQ5fPartsQ5fAccessories#ht_4466wt_960

but it doesn`t say how long the harness is....

 

[Griswald]

I use the FAST dual sensor handheld.

 

[teamsynergy]

Dan,
I use the innovate lm-2 handheld... works great! Probably will have it with me this weekend taking readings... if you wanna check it out..

 

[paulb32]

Todd, I wouldn't mind seeing that.
Dan-what are you fiddlin with now? You still have the mefi's you can't get into right?

 

[MILD THUNDER]

Innovate and Fast make nice units from what Im told. Fast dual channel is about 400 bucks or so I think.

 

[ICDEDPPL]

Yes Todd you can install it in my boat! :drool5:

I`ve heard Innovate is troublesome, fast is more than I wanna spend but is nice.
Paul, my oil on Starboard side gets dirty pretty fast and I think it`s running too rich just wanna see where those motors are at since they were only dyno tuned.

 

[teamsynergy]

Yes Todd you can install it in my boat! :drool5:

I`ve heard Innovate is troublesome, fast is more than I wanna spend but is nice.
Paul, my oil on Starboard side gets dirty pretty fast and I think it`s running too rich just wanna see where those motors are at since they were only dyno tuned.

I have not had any issues with mine... really like it.

Also, those are crockett's right??? Just sayin.. lol:driving:

 

[cdail28590]

How do these hook up? Anybody got any pics? Do they just go on the end of the exhaust? The last A/F ratio meter I used was on a car and it hooked into the O2 sensor. My boat is carbed and definately no O2 sensor so I would like to try and tune it with a A/F meter but don't really know how to hook it up or which is best.

 

[bajabob 718]

Yes Todd you can install it in my boat! :drool5:

I`ve heard Innovate is troublesome, fast is more than I wanna spend but is nice.
Paul, my oil on Starboard side gets dirty pretty fast and I think it`s running too rich just wanna see where those motors are at since they were only dyno tuned.

i use the m-1Innovate they are cheaper and work real good. i had my motors dyno and had to change the jets because of the headers. and i think its best to check it on the boat thats the real dyno my a/fs were in the 11 to rich now they are 12.7 and wot 12.5 got more top end :cheers2: the m-2 had some problems thats why i got the m-1 does less but works great for what i need