Headlines

28SS thread

The wench is buzzing around on tripple digit plus Skaters and slurping top shelf tequilla. Im stuck at home working in the bilge with a half retarded hound dog.

Somethings wrong with this picture...
 
tripple digits got them to put an alpha on a skater?? and you let your womanride in it??? you on another acetone bender??fresh air buddy...fresh air..stick your head out the window...roll the window down and watch the dog..he will show you how....
 
The last time I tried to learn from the dog all I got was how to stare out the window with an erection while drooling on myslelf.
 
As soon as I shake this hangover, Ive gotta plumb all my remote drains hook up the external oil circut and pray for no leaks this time. Theese -12 AN fittings are starting to get expensive, I'm hoping that I dont have to throw many more of them in the trash. After that I gotta get the other tranny/tailstock ready to drop(cuss scream wrestle grunt) in.
 
Tony said:
As soon as I shake this hangover, Ive gotta plumb all my remote drains hook up the external oil circut and pray for no leaks this time. Theese -12 AN fittings are starting to get expensive, I'm hoping that I dont have to throw many more of them in the trash. After that I gotta get the other tranny/tailstock ready to drop(cuss scream wrestle grunt) in.
Click to expand...

Good luck. I have a few hours of paperwork and then I am climbing in for more bilge cleaning. Gonna yank the freshwater flush system and the battery cables.
 
Tony said:
The wench is buzzing around on tripple digit plus Skaters and slurping top shelf tequilla. Im stuck at home working in the bilge with a half retarded hound dog.

Somethings wrong with this picture...
Click to expand...


There is nothing wrong with this picture :sifone:

I went to Cumberland with our Donzi group and a friend of mine comes every year with her "honorary Donzi". She had an Eliminator for years and sold it for a new 30 Skater with twin 700 EFI Sterlings. I never did find the tequila though :( Had to settle for flavored moonshine
 
Dash is finally done. What a nightmare that was.
 

Attachments

  • more progress 006.JPG
    more progress 006.JPG
    96.3 KB · Views: 80
DAMN!!!!
That looks great Tony!
Congrats on a very nice job.
How about a pic of the rats nest of wiring underneath??:ack2:
Just Kidding...
Seriously, looks great.
 
He says it looks this bad because it's all stuffed down there....
 

Attachments

  • IMG00096.jpg
    IMG00096.jpg
    73.4 KB · Views: 27
  • IMG00095.jpg
    IMG00095.jpg
    70.4 KB · Views: 28
Actually I took this one while it was being wired and it doesn't look too bad for the number of gauges.
 

Attachments

  • IMG00092.jpg
    IMG00092.jpg
    81.4 KB · Views: 49
Thanks wench. the guage wiring itself is actually neat and tidy. I made everything to where I could pull the entire dash pannel out and flip it over and lay it on the deck without stretching any wires. Obviously it lead to lots of excess sending/feed wires.
 
I certainly understand your thought process.
I've been thinking about my own re-rig, and considering doing something with a plug-in, to be able to disconnect the entire thing, and then make up a "pig-tail" to connect in between if I need to troubleshoot a gauge.
I'm only going to be dealing with 6-8 gauges, and not a huge number of switches.
Did you go with 3-way momentary starter/ign switches instead of the key?
That's what it looks like - aircraft style protected switches (if that makes sense).
I was thinking of doing the same.
 
You must log in or register to reply here.
Back
Top