ok i just got all my part for full hdy. steering .bung in the headers fuel line new pump pressure reg. i will be install soon . can not wait for summer:cheers2:
I just bought a 2" shorty IMCO for our Marlin, we'll see how it works out in a couple weeks. Everyone I've chatted with says the IMCO will improve handling dramatically.
m1 and it works the best the new m2 has problems i dail mine in at 12.7 and 12.5top speed i had 97jets on the dyno went to 86 in prim and 89 in sec pic up2mph plugs look good and boat run nice my buddy has use the m1box for 15years and works great
I just bought a 2" shorty IMCO for our Marlin, we'll see how it works out in a couple weeks. Everyone I've chatted with says the IMCO will improve handling dramatically.
m1 and it works the best the new m2 has problems i dail mine in at 12.7 and 12.5top speed i had 97jets on the dyno went to 86 in prim and 89 in sec pic up2mph plugs look good and boat run nice my buddy has use the m1box for 15years and works great
80,81 seems to be the chine dance # for all the 26'and under w/ the stock X
i had a 90 Eliminate Daytona 25 that acted the same way, at 80 w/ a little throttle left, but it was a handful i decided to leave the rest of the throttle for someone else.
Besides that, at 81 you needed a helmet to keep your face from deforming ,it hurt after 45 secs or so. your cheeks try to delam.
The shorty took almost all the chine walk out of the Marlin at 80+. But, it now does some other goofy things. Especially when slowing down a bit too quickly.
The shorty took almost all the chine walk out of the Marlin at 80+. But, it now does some other goofy things. Especially when slowing down a bit too quickly.