New Intercoolers

[Ratickle]

http://www.youtube.com/watch?v=yiny0rcM_3E Just got a vid up

Did I see 1194 Torque and 1543 HP ?

 

[Coolerman]

1547hp @ 6800 and 1329ft/lbs @ 4900 in the vid.

Previously, we have made 1570hp @ 6800 and 1380ft/lbs @ 4600, but that was a bit different tuneup as far as timing and AF goes.

 

[Ratickle]

1547hp @ 6800 and 1329ft/lbs @ 4900 in the vid.

Previously, we have made 1570hp @ 6800 and 1380ft/lbs @ 4600, but that was a bit different tuneup as far as timing and AF goes.

Must need more boost......:sifone::sifone::sifone:

 

[Coolerman]

Must need more boost......:sifone::sifone::sifone:

LOL, there is still alot left on the table with this blower and intercooler combo. Keep in mind, these numbers were achieved using carbs, msd distributor, crane ignition, standard blower intake and 23* heads, all while keeping the intake temps under 100*F with only 10gpm of flow through the intercooler.

 

[Nevr2nd]

1547hp @ 6800 and 1329ft/lbs @ 4900 in the vid.

Previously, we have made 1570hp @ 6800 and 1380ft/lbs @ 4600, but that was a bit different tuneup as far as timing and AF goes.

Soooooo, let me see if I comprehend this properly, ..........my snowcone is gonna take longer to make???? WTH???
arty:

 

[EXCESS ENERGY]

LOL, there is still alot left on the table with this blower and intercooler combo. Keep in mind, these numbers were achieved using carbs, msd distributor, crane ignition, standard blower intake and 23* heads, all while keeping the intake temps under 100*F with only 10gpm of flow through the intercooler.

Jason, you guys happy where you ended up on the carbs. I need to order my. Bob

 

[old377guy]

LOL, there is still alot left on the table with this blower and intercooler combo. Keep in mind, these numbers were achieved using carbs, msd distributor, crane ignition, standard blower intake and 23* heads, all while keeping the intake temps under 100*F with only 10gpm of flow through the intercooler.

Keep us posted and let us know when you start making the BIG horspower:sifone:

 

[Coolerman]

Jason, you guys happy where you ended up on the carbs. I need to order my. Bob

Hey Bob, just saw your FB message. The carbs turned out pretty well. Not prefect, but we are definitely happy with them. Dennis knows he has to call you.

 

[Coolerman]

Soooooo, let me see if I comprehend this properly, ..........my snowcone is gonna take longer to make???? WTH???
arty:

These snowcones won't melt!!! :cheers2: Nice and frosty.

 

[Coolerman]

Keep us posted and let us know when you start making the BIG horspower:sifone:

lmao, let me know when #6 upgrades are available! lol :driving:

 

[Coolerman]

Here are some new waterpickups we built so that the new intercoolers can get enough water. We should have them back from the welding shop mid next week, and then give them a quick touch up polish. Also, the first inch or so of the pickup has been expanded so you can put different length pipe inserts in there to adjust the height of your pickup.

 

[Nevr2nd]

Here are some new waterpickups we built so that the new intercoolers can get enough water. We should have them back from the welding shop mid next week, and then give them a quick touch up polish. Also, the first inch or so of the pickup has been expanded so you can put different length pipe inserts in there to adjust the height of your pickup.

wow, those are the nicest snowcone dispensers I have ever seen!!

 

[rschap1]

coat hooks, right?

 

[Coolerman]

wow, those are the nicest snowcone dispensers I have ever seen!!

They just help make the snowcones faster, and colder!

 

[Coolerman]

coat hooks, right?

Those would be the most expensive coat hooks that I have ever seen....... lol :biggrinjester:

 

[endeavor1]

wow, those are the nicest snowcone dispensers I have ever seen!!

:smash: :iamwithstupid:

 

[Coolerman]

locked and loaded for loto

 

[EXCESS ENERGY]

locked and loaded for loto

Sweet, Good luck guys, be careful. Get plenty of video. Bob:driving:

 

[Ratickle]

Good luck guys. I'm really rooting for the King's of the BT'rs to show everyone the way.......



Really wish we could be down there for this one. Unfortunately Terri has a business event this weekend there is no way out of. I'll be watching on the internet. Tell "Dad" no early cutout's........

 

[Nevr2nd]

locked and loaded for loto

Awesome!!

See you there. Safe travels!!