Converting the Pantera

rchevelle71

New member
To seat 5

Got a killer deal on some original Pantera bolsters, so the 3-man is gonna be the new back seat, and the fronts will be standup. THis is just a mockup, the interior is stripped, still gotta cut down the armrests on the 3-man to match the shorter center one, and re-angle tehm to match the rear of the front seat.
 

Attachments

  • P7120032.jpg
    P7120032.jpg
    124.9 KB · Views: 39
  • P7120033.jpg
    P7120033.jpg
    108.4 KB · Views: 35
  • P7120034.jpg
    P7120034.jpg
    71.3 KB · Views: 40
  • P7120036.jpg
    P7120036.jpg
    98.7 KB · Views: 33
  • P7120037.jpg
    P7120037.jpg
    57.6 KB · Views: 32
Your seat is nice, but probably cost more than my boat:D

no, hell no..it was actually cheap !! kind of build it myslef ( with help of a friend ) and got it covered at PPI !

Think about the saftey Rick...with that freeboard no way i would stick stand ups in there..sell them and for that u can get a new front seat made !
 
Got the armrest shortened, ready to go into the backseat. Not professional by any means, but it will do 'til I get the whole interior recoverd.
 

Attachments

  • P7130005.jpg
    P7130005.jpg
    51.3 KB · Views: 15
  • P7130004.jpg
    P7130004.jpg
    72.3 KB · Views: 16
  • P7130003-1.jpg
    P7130003-1.jpg
    58.4 KB · Views: 16
  • P7130003.jpg
    P7130003.jpg
    58.4 KB · Views: 16
  • P7130002.jpg
    P7130002.jpg
    60 KB · Views: 22
  • P7130001.jpg
    P7130001.jpg
    62.6 KB · Views: 18
Rick,

I havent seen him in years, but I think Joe Iglio had stand ups in his 24 that he raced as "Friendship 1". Dont hold me to that, it just looked that way in all the photos I ever saw of it racing.

Looks good cya in a few days

TC
 
Rick,

I havent seen him in years, but I think Joe Iglio had stand ups in his 24 that he raced as "Friendship 1". Dont hold me to that, it just looked that way in all the photos I ever saw of it racing.

Looks good cya in a few days

TC

Trent,

A lot of 24's had standups, I think that is where the old saying " looks like a boner in sweatpants" came from:sifone: These are kinda short bolsters, and I have angled footrests, so I wont be truly standing straight up, kinda like in your fountain. All good for SIB??

Rick
 
Gotcha.. everything is in line for sib, welded the sanford and son trailer so the boat should make it:eek::sifone:(still aggravated that the new one is sitting in Indiana but there is no way to get it to me :rolleyes:) we'll be coming in early(depending on the boss-lady) Thurs morn from Sarasota
 
Trent,

A lot of 24's had standups, I think that is where the old saying " looks like a boner in sweatpants" came from:sifone: These are kinda short bolsters, and I have angled footrests, so I wont be truly standing straight up, kinda like in your fountain. All good for SIB??

Rick

HAHA, "sticking out like a boner in sweat pants"... I still crack up everytime I think of that line.
I would prefer to have stand-ups, but with the freeboard as low as it is in these 24's I'll stick with sit-down.
 
HAHA, "sticking out like a boner in sweat pants"... I still crack up everytime I think of that line.
I would prefer to have stand-ups, but with the freeboard as low as it is in these 24's I'll stick with sit-down.

I hear ya, but when the going gets rough, I end up staning anyway, might as wll have the proper seat to do so.
 
Gotcha.. everything is in line for sib, welded the sanford and son trailer so the boat should make it:eek::sifone:(still aggravated that the new one is sitting in Indiana but there is no way to get it to me :rolleyes:) we'll be coming in early(depending on the boss-lady) Thurs morn from Sarasota

I'll give ya a call sometime this week, is the formula ready to go?
 
I have the same bolsters (no piping). I like them. Happy medium. Good for stand-up or sit-down. I think you'll like them.
 

Attachments

  • DSC03961.jpg
    DSC03961.jpg
    42.1 KB · Views: 14
5 man stand-up with a single outboard...Can't say that I've seen that before...ever. And how, exactly, do you(or anyone) stand up in that back bolster? Am I missing something here?
 
Back
Top