Headlines
Throttle Up CNC Propellers
- Thread starter ThrottleUp Props
- Start date
It ,s a 1989 32 hustler straight v- hull whit notched transom , there stock 32 maximus 15 5/8 diameter
thx ,
Bor
ThrottleUp Props
Sponsor / Charter Member
Hey Bor,
High rake props are really best for your hull....however if you feel you can afford more stern lift, then we can look a your data. Traditionally, Older Conventional Vee Bottom Hulls, appreciate the high rake, as the propellers will help to carry the bow (since you have no steps to assist).
Julie
Hey Julie,
The numbers are quite good have a slip number of 7 % .
first thing when the snow is gone here I am going to try the bravo,s and get some more data also gonna get the exact weight of the boat .
also want to try some 1,36 gear ratio to get the prop speed a little up
When I have some more data I will contact you again
thx bor
ThrottleUp Props
Sponsor / Charter Member
Sounds great bor!
Julie
Julie
ThrottleUp Props
Sponsor / Charter Member
ThrottleUp Props
Sponsor / Charter Member
I still have several sets available....now that the holidays are over, lets talk performace!
Julie
Julie
fastlane40
New member
Team Tsunami
New member
Clear out your PM's Julie!
ThrottleUp Props
Sponsor / Charter Member
Hey Thanks for the props Julie,
They are gorgeous. A guy needs a sweet deal once in a while.
.
You are so very welcome!!!! I think your boat is going to run very well with the props.
Thanks!
Julie
ThrottleUp Props
Sponsor / Charter Member
So are they a little tall for you, I assume? If you are shy on RPM then lets get you in a set of semi-cleavers and light her up!!!!
If you wish, PM the details to me and I'll get started.
Julie
DCB F32
New member
Hey Julie,
I have a DCB F32 with Teague 800's EFI . Imco SC drives.
Current props are 4 Blade Bravo Stamped 37 Pitch. They are labbed. I purchased the boat used,the props were supposedly done by Merc Racing.
The boat I am told has done 137 with these props. I have been to 130 with stick left. The boat rolls over fairly well but I am thinking a 5 Blade prob may be better for crusing.
Thinking about maybe a 34 5 blade. Would any of these props you have be suitable.
Thanks,
Jeff
I have a DCB F32 with Teague 800's EFI . Imco SC drives.
Current props are 4 Blade Bravo Stamped 37 Pitch. They are labbed. I purchased the boat used,the props were supposedly done by Merc Racing.
The boat I am told has done 137 with these props. I have been to 130 with stick left. The boat rolls over fairly well but I am thinking a 5 Blade prob may be better for crusing.
Thinking about maybe a 34 5 blade. Would any of these props you have be suitable.
Thanks,
Jeff
ThrottleUp Props
Sponsor / Charter Member
Yes I think I may have something for you. Why dont you PM me your performance data so I can take a look. I am curious because it is very rare when someone tells you they are running a 37P Bravo! Almost unheard of actually.
Julie
Julie
DCB F32
New member
PM sent
ThrottleUp Props
Sponsor / Charter Member
Thanks look forward to talking with you!
Julie
Julie
Team Tsunami
New member
31's are sold!
Thanks Julie for all your help. Cant wait to try them out....now its really going to be a long next couple of months!
Thanks Julie for all your help. Cant wait to try them out....now its really going to be a long next couple of months!
ThrottleUp Props
Sponsor / Charter Member
They are on their way~!
Julie
Julie
SLOWRIDE-388
New member
Do you have any 5 blade props for #6s? looking for 18x34.
thanks,
Ben
thanks,
Ben
ThrottleUp Props
Sponsor / Charter Member
Here is what I have left from my private collection.
16.25 x 36P 5B 18 deg 650 HP RH & LH
16.25 x 40P 5B 16 deg 650 HP RH & LH
16.25 x 39P 5B 18 deg 650 HP RH & LH
Now we, Throttle Up Propellers/SAI can make you a custom set of propellers as well.
Julie
16.25 x 36P 5B 18 deg 650 HP RH & LH
16.25 x 40P 5B 16 deg 650 HP RH & LH
16.25 x 39P 5B 18 deg 650 HP RH & LH
Now we, Throttle Up Propellers/SAI can make you a custom set of propellers as well.
Julie
Similar threads
