Raising X Dim - $$$$$$

[ChiefApache]

Thanks! Maybe in the years to come I'll dial it in but for now I think I'm going to leave it as it is and just enjoy it. Besides, everyone knows I'm half throttle Frank anyway. :sifone:

How much HP are you running?

We run 4psi of boost.

 

[Geronimo36]

800's give/take.

It was 838 with7 psi and 800 with 5 but I don't know what it is on 6

 

[Geronimo36]

I'll buy a few feet to if you can ship it.. UPS will ship 4' of it. How much?
Or cut it in half, ship the 2 pieces to me and I'll divide it up for the rest of you...

Did you get your package? :driving:

 

[26 Spyder]

Did you get your package? :driving:

Yes I did! Thanks!

 

[Geronimo36]

Yes I did! Thanks!

Cool!:sifone: UPS biotched I didn't have it in a box, F'em! :seeya:

 

[Geronimo36]

You will probably get the 1200 back in fuel savings.:biggrinjester:

Running up to NYC last week I burned less than a 1/4 tank... In years past that was roughly a 1/4 tank run!!! :26:

 

[jeffswav]

Nice project, I am getting ready to do the same thing to a single engine. I am at 8" below now, I would like to raise it 3" for a 5" propshaft centerline. Do you have any more pictures of how you pieced together the transom?

 

[MOBILEMERCMAN]

Welcome jeffsway.

Enjoy the site.

 

[Trim'd Up]

Nice project, I am getting ready to do the same thing to a single engine. I am at 8" below now, I would like to raise it 3" for a 5" propshaft centerline. Do you have any more pictures of how you pieced together the transom?

I raised mine on my single Baja, I believe I am at 3 1/2"-4" below the hull now. I'll look on the other computer for pics of the process. I cut 3 steps into the plywood on the inside so each layer of plywood was a little larger than the last. You only need to fill the bottom few inches.

 

[jeffswav]

I raised mine on my single Baja, I believe I am at 3 1/2"-4" below the hull now. I'll look on the other computer for pics of the process. I cut 3 steps into the plywood on the inside so each layer of plywood was a little larger than the last. You only need to fill the bottom few inches.

Where do you live at? I am in Millstadt IL.

 

[Offshore Ginger]

Jeffsway , welcome .

 

[Trim'd Up]

Where do you live at? I am in Millstadt IL.

Not far from you at all, Collinsville. Welcome neighbor.:sifone:

 

[Geronimo36]

Here's a blast from the past thread!!

I wonder what this winters projects will bring.......

 

[MOBILEMERCMAN]

I am going to raise mine too.. I just need to do a few other things first. Like strip cabin. Repair part of 2 bulkheads that got soft when the floor got soft. I am anticipating I will be replacing all the horizontal wood in cabin with balsa. Nice project Huh?

Got to love your boat.

 

[Trim'd Up]

I am going to raise mine too.. I just need to do a few other things first. Like strip cabin. Repair part of 2 bulkheads that got soft when the floor got soft. I am anticipating I will be replacing all the horizontal wood in cabin with balsa. Nice project Huh?

Got to love your boat.

I feel you pain, I didn't have anything left in my boat but the shell. It is better than new now with extra bulkheads and no wood.

 

[MOBILEMERCMAN]

I have done it numerous times for customers. Now I get to do mine.

 

[Geronimo36]

Cool project Jimmy!!! Please share!!

I'll be doing regular maintanence this year... Rebuilding the lowers with new gears/bearings and one long-block (250 hrs on it) so both sides are fresh.

I was hoping to have the engine out and in my shop and have started dissasembly already but I've been draggin azz the last couple weeks... I guess I'll have to get my butt out there in the next week or two and set up the gantry.... The only thing I've accomplished so far is winterization and taking the drives off.

I don't wanna be working on this crap come April, I'd rather have it done and ready to go back in even if it sits on the floor all winter!

 

[MOBILEMERCMAN]

Cool project Jimmy!!! Please share!!


I don't wanna be working on this crap come April, I'd rather have it done and ready to go back in even if it sits on the floor all winter!

I will. Not excites about it. Just need to do it.

You know better already:sifone:

 

[Geronimo36]

Mad a lot of progress since we last spoke!:willy_nilly::willy_nilly:

 

[Offshore Ginger]

Mad a lot of progress since we last spoke!:willy_nilly::willy_nilly:

Mad a lot of progress i guess after looking at all that on the table i would be freakin out :rofl::rofl::rofl: because im the type of person who even hates to change the oil .:rofl::rofl: Frank , when are you going to start slapping those bad boys together ?