Moving parts off the shelf

[MERPerformance]

1 Set of Comp Cams 1.7 take-off rockers.$150

 

[MERPerformance]

1.8 Comp Cams rockers 1/2 set plus 3 take-offs $90

 

[MERPerformance]

Crane Gold 1.7 Almost new. 3 of them have slight damage from push rod, guide plate failed. $100

 

[MERPerformance]

2 Blower Shop Inner cooler cores take-outs $300 each

 

[MERPerformance]

Engine Knock System From Livorsi make me a fair offer on this, I have 2 kits

 

[MERPerformance]

Starter take-off $120

 

[MERPerformance]

CMI tails 4" new Straight $200

 

[MERPerformance]

New 4" tips $150

 

[MERPerformance]

Trim tabs $300 SOLD?

 

[MERPerformance]

2 sets valve covers, 2 piece 1 set missing lower plates $100
Bottom plates are chromed covers are powder-coated. Like new.

 

[MERPerformance]

Like new helm unit -6 fittings, 75cc this was a take off it was replaced with a 160cc $110

 

[MERPerformance]

30" Bravo one, labbed take off $250

 

[MERPerformance]

JE Pistons 4.500 bore 1.395 compression height. These are take outs.
Need wrist pin bosses lightly honed from removing spiral locks. I believe I have 10-12 pistons

 

[MERPerformance]

Used JE pistons inverted dome 4.500 bore 1.345 compression height. $300

 

[PARADOX]

New 4" tips $150

How many tips do you have ? I need 4. You got 4 I'm interested.

 

[14 apache]

Sent pm on trim tabs i will take them.

 

[klaw]

Like new helm unit -6 fittings, 75cc this was a take off it was replaced with a 160cc $110

do you know is tis would be to small a helm for a ITS transom assembly it is on a 20 cig with a blackhawk

 

[DAREDEVIL]

JE Pistons 4.500 bore 1.395 compression height. These are take outs.
Need wrist pin bosses lightly honed from removing spiral locks. I believe I have 10-12 pistons

With a 4 inch stroke ,,, would these be 9.5:1 compression ??

 

[MERPerformance]

How many tips do you have ? I need 4. You got 4 I'm interested.

Sorry only 1 pair

 

[MERPerformance]

do you know is tis would be to small a helm for a ITS transom assembly it is on a 20 cig with a blackhawk

It came off of a 33' Fountain with #4 speedmasters, twin Mayfair rams with 5/8 " shafts. We replaced them because; my customer had lost some of his movement in his right arm and we went to twin pumps and larger rams. It worked fine before we took it off.