Show off those MTIs

[catmando]

I don't know for sure, there are two 2004's that look very similar. The other one has had several engine packages in it including Ilmors when it was built. It has 6's on it and 900 SC's in there now. This boat was in Cali. but also apparently spent some time in Florida - there are pics of it on FPC runs. It has 900 SC's that have always been in it and it has BPM drives and a rudder. The impressive thing is that even with relatively small power it will churn out 130 mph with 5 people and a full tank of fuel . And it is the most stable cat I have been in.

The one I saw was at the 2005 Miami show and it was a rudder boat with 900s if I remember correctly. With the PR cockpit and cabin it was heavier than the sitdown boats which probably contributed to its stability.

 

[sellsman11]

The one I saw was at the 2005 Miami show and it was a rudder boat with 900s if I remember correctly. With the PR cockpit and cabin it was heavier than the sitdown boats which probably contributed to its stability.

The "Dealin With The Devil" boat is still in Canada. It has had a complete facelift.

 

[jax55]

Frankie, had a great time in KW, even though we came back in pretty rough water, the only scary part of the whole trip was you driving Bullish!!

 

[Freezeframevideo]

 

[Catwoman]

 

[boatme]

Comanche,

Cool boat

Who owns it and where is it run ?? I have never seen this one

 

[boatme]

Ed,

Thanks

no wonder i never saw it before (Sweden) interesting Boat

 

[jayboat]

I've got a few MTI shots.
From Key West this year...

 

[jayboat]

Jax River Rally, '07 and '08...

 

[RPM]

The bottom 2 shots from Key West are bad ass Jay...Nice work!

 

[Offshore Ginger]

Please guys do not get me wrong and why does it seem like every deck on an MTI l@@ks the same on every boat no matter what sizeeeeeeeeeeeeeeeee, weather it be a canopy boat or pleasure ? I know randy from working at Skater and it seems like there is no custom decks comeing out of his stable , considering Skater will build anything that you desire or what ever the wallet will bear and i am sure this will get you boys talkin some $hit ............ ha ha ha :sifone::rofl::rofl::rofl::03::beatdeadhorse5:

 

[Wild]

Please guys do not get me wrong and why does it seem like every deck on an MTI l@@ks the same on every boat no matter what sizeeeeeeeeeeeeeeeee, weather it be a canopy boat or pleasure ? I know randy from working at Skater and it seems like there is no custom decks comeing out of his stable , considering Skater will build anything that you desire or what ever the wallet will bear and i am sure this will get you boys talkin some $hit ............ ha ha ha :sifone::rofl::rofl::rofl::03::beatdeadhorse5:

when its perfect there is nothing else to do to it.......
if it aint broke dont fix it ............

 

[Bradz]

You mean the Skater custom flat deck?? I have only seen 1/4 canopy or now the windshield they are using. The back over hang is different but that is not a big thing to change.
MTI has 4 seaters cockpits, 5 seat cockpits and now the larger six seat that is much different than the orginal.
How is this for custom?
Top on:
Top half off:
Top gone:

 

[Offshore Ginger]

You mean the Skater custom flat deck?? I have only seen 1/4 canopy or now the windshield they are using. The back over hang is different but that is not a big thing to change.
MTI has 4 seaters cockpits, 5 seat cockpits and now the larger six seat that is much different than the orginal.
How is this for custom?
Top on:
Top half off:
Top gone:

Sorry guy but........................ i was talking exterior not interior and if that is custom so is a bus . I was just asking in a previous post why ................ is it that every deck l@@ks the same weather it is race or pleasure . I have to say that seeing every boat with this style of deck race , or pleasure , would be considered a production boat , not a custom one off and i also would like to mention that i am not trying to raise hairs on the back of anybodys neck.:seeya:

 

[Bradz]

What the heck are talking about???? Every new Skater has a flat deck. What is so custom about that? I do think they look great, but they are all the same flat deck. I love the Skaters (I own one now) I love the MTI's (got one of those also). Speaking of customs MTI is legendary for their custom theme boats.

 

[WeaponX]

Please guys do not get me wrong and why does it seem like every deck on an MTI l@@ks the same on every boat no matter what sizeeeeeeeeeeeeeeeee, weather it be a canopy boat or pleasure ? I know randy from working at Skater and it seems like there is no custom decks comeing out of his stable , considering Skater will build anything that you desire or what ever the wallet will bear and i am sure this will get you boys talkin some $hit ............ ha ha ha :sifone::rofl::rofl::rofl::03::beatdeadhorse5:

Better have a close look at Bob Bulls new boat"CMS" a little closer. :sifone:
The whole boat is one off. For now.

And when will Skater change up the old drag boat style interior??:ack2:

 

[catmando]

Better have a close look at Bob Bulls new boat"CMS" a little closer. :sifone:
The whole boat is one off. For now.

And when will Skater change up the old drag boat style interior??:ack2:

Looks like a 44' running surface with a 4' bustle.

 

[WeaponX]

Looks like a 44' running surface with a 4' bustle.

A 44 MTI has around 41'6" running surface this boat has a little more than 44'.

 

[catmando]

A 44 MTI has around 41'6" running surface this boat has a little more than 44'.

That's what I was thinking. There's no info about it on the site though. I would love to see one in the Turbine class. JT and a good driver would give Geico a run for their money.

 

[olli]

The original