1997 CC Remake

I've said it before, I'll say it again: Love your 'restorers'....Their the ones keeping history.... Beautiful and Alive!!!! Looks great Brooks.
 
All the hole are drilled in the bracket and tab pumps are ready, had to drill the cable holes larger and paint with bilge cote
 

Attachments

  • IMG_0301.jpg
    IMG_0301.jpg
    52 KB · Views: 13
  • IMG_0300.jpg
    IMG_0300.jpg
    50.5 KB · Views: 12
All the pumps are hung and oil tanks mounted. Shift and throttle cables and motor cable pulled thru
 

Attachments

  • IMG_0307.jpg
    IMG_0307.jpg
    69.6 KB · Views: 10
  • IMG_0305.jpg
    IMG_0305.jpg
    63.9 KB · Views: 6
  • IMG_0309.jpg
    IMG_0309.jpg
    64.5 KB · Views: 7
Some more
 

Attachments

  • IMG_0310.jpg
    IMG_0310.jpg
    49.8 KB · Views: 6
  • IMG_0312.jpg
    IMG_0312.jpg
    82.8 KB · Views: 13
  • IMG_0314.jpg
    IMG_0314.jpg
    62 KB · Views: 12
+1

Are you mounting them in the same location?

300XS's are 36lbs lighter than the 225's I think?

Trial and error and going with where they were or going the math route?

The old owner said the motors were mounted high and the boat ran 81 from the factory with the 250s, but he said it was a dog out of the hole and dropped the motors lower ran 74, so we're going to start lower and work up, the motor on now is at the highest mount but is only on to get all the cable lengths set.
 
Radar arch off today
 

Attachments

  • IMG_0324.jpg
    IMG_0324.jpg
    71.7 KB · Views: 9
  • IMG_0326.jpg
    IMG_0326.jpg
    81 KB · Views: 8
  • IMG_0327.jpg
    IMG_0327.jpg
    63.8 KB · Views: 9
Back
Top