Wheres the transducer?

[mhulsth@gmail.com]

Here is probably an easy question for most of you. Having problems with the depth gage on my 91 230 Conquest. Guessing the problem is in the transducer. I havent done a search yet but am guessing it is mounted internally in the hull somewhere>
Any help?

Thanks
Mark

 

[Flying Dutchman]

Usually they are toward the bottom of the V, just forward of the engine, unless it is aftermarket and somone has hung it off the transom. Good Luck

 

[CarbonKevlar]

1 800 lastbid has a 38 , starting bid is $100.00 w/serial # PPN38164G12 :huh:

 

[Serious News]

http://auction.repocast.com/details.cfm?ID=1702872#

LOT 2-186030

Year: 2012 Make: Powerquest
Model: 380 Avenger Power Boat
Engine: none
Transmission: none

Bid Status

More Details


2012 Powerquest 380 Avenger Power Boat, Hull ID# PPN38164G712, MC# 0158TQ Exp. 2017, 39’ 7” long, 8’6” Beam, No Motors, No Outdrives. Stepped Hull, Pop-Up Cleats, Full Windshield, Stainless Rub Rail, Stainless Mufflers, Bolster Seats, Swim Platform, Swim Ladder, AM/FM/CD With Speakers (needs to be hooked up), Under Seat Storage, Navigation Lights, Wet Bar/Sink, Head, Microwave, Refrigerator, Sun Hatch, Shore Power, Cockpit Cover (This boat is unfinished, it has never been rigged or in the water.) Overall In Good Clean Condition. Trailer does not sell with the boat.

MUST BE PICKED UP WITHIN 7 DAYS.

Location: REPOCAST.COM - BYRON CENTER, 601 Gordon Industrial Ct., Byron Center, MICHIGAN 49315 [60443] (OUTSIDE 39, Keys in CIO-120)

 

[Ratickle]

Didn't that boat already get auctioned off once or twice?

 

[rschap1]

The 22 Raizor been through already.
I heard that there were 2 Avenger hulls coming at that time...this being the first with second yet to come.

 

[CarbonKevlar]

this was Jim's ,it was the boat the 525's and XR's were for, standard layup w/stock vent's. The second 38 was infused w/new vent's

 

[CarbonKevlar]

This boat was on the floor when Phill and Jim bought PQ, why the serial # change? Excess Gel from label maker, they come out of the mold clean.:toetap05s don't break the windshield, it was a prototype from Taylor $6500.00