Headlines

What glass/cloth combo??

Tony

Tony

Founding Member
The bow eye on my Whaler got ripped loose over the weekend. Its basically an eyebolt with a 4" square backing plate inside the boat. It looks like there was only a few layers of glass between the foam core and backing plate. There isnt any rot it was just pulled out by force.

Im thinking since this is going to be sandwiched between a lot of pressure that Epoxy resin probably isnt a good idea?
 
Tony , did the backing plate rip thru the boat and why do you think that using epoxy isnt a good idea ? Tony either way you are going to need some beef and the fabric of choice that i would suggest using is # 1708 .
 
Last edited:
Yes, the backing plate ripped through the 2 layers of glass on the inside and lodged in the foam core.

Wouldnt the epoxy tend to crack under a lot of squeeze pressure?
 
Tony said:
Yes, the backing plate ripped through the 2 layers of glass on the inside and lodged in the foam core.

Wouldnt the epoxy tend to crack under a lot of squeeze pressure?
Click to expand...
Tony i would see no proplem with epoxy cracking under preassure just give the repair more beef then it had and you should be good to go .
 
Epoxy resin is stronger than polyester. Why do you think it would crack before polyester would? 1708 would be what I would use too. You will get a really strong repair with just a couple of layers instead of using bunch of layers of lighter cloth.
 
Dude, Are you going to be up this weekend. I could bring some 1700 back with me for ya.
Jr.
 
J-Bonz said:
Dude, Are you going to be up this weekend. I could bring some 1700 back with me for ya.
Jr.
Click to expand...

1700 is the way to go with epoxy. Wets out way eaiser then 1708 and will be among the strongest laminate you can get with epoxy. if you have any gaps to fill mix in some 404 and do those first

OK Tony . . . . how'd this happen if i might ask :D

(if its a boring trailer incedent please feel free to make up some funny story of how this happened out at the Casino :D)
 
I hooked a line to the bar and tried to tow it out of the building in reverse. The bar won. :D
 
glassdave said:
1700 is the way to go with epoxy. Wets out way eaiser then 1708 and will be among the strongest laminate you can get with epoxy. if you have any gaps to fill mix in some 404 and do those first

OK Tony . . . . how'd this happen if i might ask :D

(if its a boring trailer incedent please feel free to make up some funny story of how this happened out at the Casino :D)
Click to expand...
Tony S or E glass is made for epoxy repair and Cabosil is far more cheaper then 404 which is way overpriced and Cabosil is a filler additive designed to thicken resin .
 
Offshore Ginger said:
Tony S or E glass is made for epoxy repair and Cabosil is far more cheaper then 404 which is way overpriced and Cabosil is a filler additive designed to thicken resin .
Click to expand...

cabosil is a light filler that cannot handle a compressive load even remotly as well as 404 and a qt of 404 is what elevan bucks? I'd still stick with a high density filler in the bow eye area if you needed it. C'mon Artie get out of the stone age you trouble maker you. :p :willy_nilly::biggrinjester:


Tony for your application i would get my hands on some of the 1700 from Jack and build it up nicely from the inside. Up side of the 1700 is wetout ability especially working in close quarters. If you the strongest fiberglass S is the top shelf stuff followed by E like Artie says. For what your doing you'll be fine with any nice tech weave in all reality (as long as it has no mat).

Hey Artie, you been to Skater lately? Pete's making me some interesting parts for a job i have. I'll call you with the details. Its right in you expertise
 
1700 is a 17oz bi-ax fiberglass cloth with no mat stiched to it like the 1708 has. You can use a stiched mat with epoxy but it is difficult to wet and does not have near the strength of a good tech weave. Mat is usually used as a bonding layer in fiberglass systems but it is unnecessary with epoxy. Also standard non stiched mat has a binder that does not break down with epoxy leaving it a very weak laminate.

The number denotes what weights are in a given cloth

1708= 17oz cloth with 3/4oz mat
1700= 17oz cloth with no mat
1815=18oz cloth with ounce and a half mat
and so on
 
After using the 1708 with Epoxy, I'll definitely be using 1700 on the next project. I found it difficult and time consuming to wet it out properly. Matter of fact, the first laminate I called up Dave and said WTF, this stuff is weird! ;)

One thing is for sure, the work area is plenty strong regardless. 830+ hp and run in some big seas this year and it's better than ever! :)
 
Tony said:
What exactly is 1700? And why shouldnt you use mat?
Click to expand...
1700 is actually S glass and Dave in all the years that i worked at Skater Pete has never used `404`and still dosent to this day .Dave if i would have suggested using 404 at Douglas Pete would have rolled his eyes at me and just laugh . Dave im hopeing to be out there this week to order some materials and what are you getting from Douglas and might it be pods for the tunnel ? Dave , whos in the stone age .................. hell the last time that i used Poly or vinyl was over 25 years ago and the first time i started using Epoxy was when i was in my early 20's building windmill blades for the Guoegon Brother's in Bay City Mich or the makers of West system mr Flintstone he he he he . Dave shoot me a ring or ill buzz you .
 
Last edited:
lol just bust'in on ya Artie. Maybe not 404 but atleast use a high density filler. Cabosil gets to light for me if i need high compression. I use 404 because its easy to get and cheap. Cabosil is great stuff for filling all kinds of voids i just dont think it has great bond or compression characteristics.


Yea go check on my pods and tell him NO CABOSIL lol :ack2::leaving::willy_nilly:

I'll call ya, is this one of yours?
 

Attachments

  • windmill.jpg
    windmill.jpg
    85.7 KB · Views: 1
glassdave said:
1700 is a 17oz bi-ax fiberglass cloth with no mat stiched to it like the 1708 has. You can use a stiched mat with epoxy but it is difficult to wet and does not have near the strength of a good tech weave. Mat is usually used as a bonding layer in fiberglass systems but it is unnecessary with epoxy. Also standard non stiched mat has a binder that does not break down with epoxy leaving it a very weak laminate.

The number denotes what weights are in a given cloth

1708= 17oz cloth with 3/4oz mat
1700= 17oz cloth with no mat
1815=18oz cloth with ounce and a half mat
and so on
Click to expand...

So, Im guessing this stuff isnt the standard mat, cloth, or woven roving that you buy at Napa?
 
glassdave said:
lol just bust'in on ya Artie. Maybe not 404 but atleast use a high density filler. Cabosil gets to light for me if i need high compression. I use 404 because its easy to get and cheap. Cabosil is great stuff for filling all kinds of voids i just dont think it has great bond or compression characteristics.


Yea go check on my pods and tell him NO CABOSIL lol :ack2::leaving::willy_nilly:

I'll call ya, is this one of yours?
Click to expand...
you Dawgggggggggggggg :rofl:
 
Tony said:
So, Im guessing this stuff isnt the standard mat, cloth, or woven roving that you buy at Napa?
Click to expand...


nope, if you get in a pinch i can send you a few square feet but it sounds like Jack should have plenty of end cuts left over from his Apache project. I am guessing you only need a square few feet?
 
Tony,
Like I said, I should be back this weekend. I have enough to spare. I can give to Full Fart or who over you want. Should be at the casino saturday night if all goes well. Might have to stop at the sand bar party for a little........... Jus give me a call....
Jr.
 
You must log in or register to reply here.

Similar threads

Serious News
The High-Tech Battle Against Pirates
Replies
2
Views
3K
Serious News
Serious News
Back
Top