Couple ques for my winter projects

[BDiggity]

1. Wife wants to do away w/ the wood finish on berth table & also ice chest (which means the door trim too). Any suggestions? White would probably be the safest color choice, but dont know how to finish.

2. I want to remove the current transom brass water dumps for the Gil exhausts. I think i found some on cpperformance, "Dual 3/4" NPT Polished Stainless Water Discharge Fitting". Does that sound like the right item?

3. Going to replace the pitot too. Looking at pics i took, seems it has a 1/8" pitot to a 1/4" adapter back to a 1/8" hose fitting. Not sure what the previous owners did. Besides fittings, does it make a difference on hose size? the current hose is brittle so i was going to replace it anyway. Is 1/8" the normal size?

4. What would you call these things? (see attached pic). Going to put new ones on & will call Cig next week to see if i can just buy them w/out the rest of boat attached.

 

[phragle]

step plates

 

[Seafordguy]

Regards #1 - I have seen pictures of people who have had the wood trim redone in white fiberglass. I think that is your best bet. The table and the cooler top looked really nice in the few pictures I have seen, some with Cig Logo's emblazoned in them, etc....

I dont think you will be happy with the results of it being painted.

 

[Seafordguy]

Regards #1 - I have seen pictures of people who have had the wood trim redone in white fiberglass. I think that is your best bet. The table and the cooler top looked really nice in the few pictures I have seen, some with Cig Logo's emblazoned in them, etc....

I dont think you will be happy with the results of it being painted.

Attached Picture - This belongs to member BaronMarine - Hope he doesn't mind.....

 

[BDiggity]

I dont think you will be happy with the results of it being painted.

i guess i can put down my cans of spray paint then. :26: yeah i was thinking of some veneer finish but didnt know what was all out there. The ice box lid has to remain very near the same outer dimensions tho so it still fits properly. How thick is fiberglass?

 

[Seafordguy]

i guess i can put down my cans of spray paint then. :26: yeah i was thinking of some veneer finish but didnt know what was all out there. The ice box lid has to remain very near the same outer dimensions tho so it still fits properly. How thick is fiberglass?

I have contempleted taking the old lid to a glass guy and just having him make a mold of it and then making the glassed top an exact fit. Not sure of the cost of something like that, but I have seen a lot of the old TG's and Cafe's with those lids - maybe someone can chime in that has done it??

 

[OldSchool]

One word.....Plastic!!!! Alot of the older Cigs have had the teak replaced with plastic (Lexan). I know that LipShip has done a bunch, but I'm not sure if there is a kit for it. Give him a call.

I have the white lexan step plates on my boat. there are rubber strips in them spaced about every 3/4 inch to keep the slip factor down.

 

[Seafordguy]

One word.....Plastic!!!! Alot of the older Cigs have had the teak replaced with plastic (Lexan). I know that LipShip has done a bunch, but I'm not sure if there is a kit for it. Give him a call.

I have the white lexan step plates on my boat. there are rubber strips in them spaced about every 3/4 inch to keep the slip factor down.

That is probably what the ones I have seen are.....

 

[BDiggity]

One word.....Plastic!!!! Alot of the older Cigs have had the teak replaced with plastic (Lexan). I know that LipShip has done a bunch, but I'm not sure if there is a kit for it. Give him a call.

I have the white lexan step plates on my boat. there are rubber strips in them spaced about every 3/4 inch to keep the slip factor down.

i had the lexan step plates too but both cracked so i removed them. thats why i want to replace w/ what they are using on new models.

 

[Tank]

i had the lexan step plates too but both cracked so i removed them. thats why i want to replace w/ what they are using on new models.

Michele (Mickey) and I had custom billet ones made through www.westcoastoffshoreunlimited.com Kevin (the owner) can powder coat or polish them and he can inlay them with the rubber inserts.

The lexan wood replacement is cool but if you're planning on Lip=Ship doing it, Phil needs the boat there. There's no pre-made kits.

Pic of our steps:

 

[Tank]

Kevin also did a billet glove box with "born on 188th st." emblem in it. Also got me the chrome extinguishers and billet holders.

 

[BDiggity]

thanks, their plates were half the price as Cigarettes. & they have that swim platform i like, but thats gonna have to wait.

 

[wild thang]

I would be interested in buying your teak cooler lid. Mine was missing when I bought my boat. After you decide call me @ 252-339-4560

thanks
Harvey

 

[baronmarine]

Attached Picture - This belongs to member BaronMarine - Hope he doesn't mind.....

Sea: i must say i about fell out of my chair when i first saw that pic. i love the whiteout look. and i don't have the pillows anymore. lol. btw i don't mind a bit.

todd

 

[tommymonza]

Sea: i must say i about fell out of my chair when i first saw that pic. i love the whiteout look. and i don't have the pillows anymore. lol. btw i don't mind a bit.

todd

Sweet pillows Fruitloop

What did you do take them out of the boat so you can roll around in bed with them:sifone:

 

[Kool-Aid Man]

So who's got pics of the Lexon around the the cabin door where it use to be wood? I've gotta get rid of mine as well!

 

[Zero Patience]

Lip Ship can fix you up. However, the wood is tough and can take the flex of hard rough water runs. The lexan will break if the boat moves any. Seen it happen on the way back from the Bahamas two different times on a Cafe.

 

[Quinlan]

Kevin also did a billet glove box with "born on 188th st." emblem in it. Also got me the chrome extinguishers and billet holders.

Tank where did you get the BORN ON emblem ?

 

[CRT]

Here is a shot of the front of my '93. Wood gone.

 

[Tank]

Tank where did you get the BORN ON emblem ?

Kevin at West coast offshore unlimited found them. Then he built the glove box around it. It's pretty trick the way he did it and though I can't remember the exact price, I know it wasn't too bad.

By the way, I actually like the wood in our cabin and around the entrance. I always loved the Playboys wood floors too.