Headlines

Skater Fuel Tanks

ar15meister

ar15meister

Charter Member
How do you figure out if the fuel tanks on a Skater need to be redone? Is there a way to check them without an invasive procedure?

How much does it cost to redo them?

Thanks in advance.
 
If they havent been done they most likely will for safety reasons. Its more a cause of fuel that's available these days as opposed to when it was built. Have it surveyed and inform the tech of the potential of that problem. Invasive is still the best way. I just did about a dozen core holes in a 36 Skater i have in the shop to determine the condition overall. You could have five to eight grand on up in just the tanks pretty easy. If they have leaked into the core it could get pretty ugly. I put a set of aluminum tanks in this one, problem solved.
 

Attachments

  • 36 skater 010.jpg
    36 skater 010.jpg
    99.6 KB · Views: 35
  • 36 skater 006.jpg
    36 skater 006.jpg
    134.2 KB · Views: 35
Last edited:
stainless just got his done at Skater drop him a line/

It's a Skater Nation! So they tell me....
 
runninhotracing said:
See BIG Daddy now your catchin on !!!!!!!!!!!!!!!!!!!:cheers2::cheers2::cheers2:

ROCK ON !!!!!!!!!!!!!!!!!!!!:sifone:
ITS A SKATER NATION !!!!!!!!!!!!!!!!!!!!!!!!!!!!
Click to expand...
I think I only have to write this another 48 times to fulfill my engagement to Jim and PBam for giving me charity in Key West....


It cuts me man.... It cuts me deep! :D


It's a Skater Nation!





(one less)
 
I had mine done last Winter by Skater, and paid about $6k if I recall. It's a flat rate depending on the model you have, and depending on if it's already destroyed the tank. There was nothing wrong with mine going in, but since I already had it up there, I figured I'd go ahead & get it knocked out while I was having various other stuff done.

You can tell if the boat may need them done by checking the fuel in your fuel filters. If they are getting soft, the fuel will have a white material in it. My boat has always ran race fuel, which does not contain ethanol, or any other additives that could compromise the tank. If you've been running 87-89oct pump gas in the last 5 years or so, you might check them out. As it's been explained to me, 91oct & above doesn't contain ethanol?

Hope that helps a little. :cheers2:
 
Last edited:
glh said:
I think I only have to write this another 48 times to fulfill my engagement to Jim and PBam for giving me charity in Key West....


It cuts me man.... It cuts me deep! :D


It's a Skater Nation!


Oh Yeah heard Pwam :ack2: gave you more then charity BIG Daddy ::kiss:

now on with it B!@tch :eek:




ROCK ON !!!!!!!!!!!!!!!!!!!!:sifone:
ITS A SKATER NATION !!!!!!!!!!!!!!!!!!!!!!!!!!!
Click to expand...
 
GENERAL LEE said:
...As it's been explained to me, 91oct & above doesn't contain ethanol?
Click to expand...
Are your sure about that Brandon?

Never heard that, we fuel DOI at a specific place without ethanol in the fuel here in Burlington and have never fueled it anywhere else, even doing PR's but I have never heard that ethanol thing on 91+ gas.
 
Its in all our 93 octane around here pumps are marked plain as day 10% ,may depend on what state and how much Corn the govt has to buy from the farmerz



Back to the tanks Meister would'nt sweat the load ,if they truly need to be done SKATER can do it and when they did ours they made it look like a walk in the park ...



ROCK ON !!!!!!!!!!!!!!
ITS A SKATER NATION !!!!!!!!!!!!!!!!!!!!!!!!
 
Didn't Chris w/ that Bad Azz 40 blue/silver & the 1500 Sterlings have a bunch of issues because of tank stuff?????:confused:
 
glh said:
stainless just got his done at Skater drop him a line/

It's a Skater Nation! So they tell me....
Click to expand...


heeeeey, one long weekend trip in Miami and KW is all you apparently needed!!!! i knew you'd come around, gl. :cheers2:


joe
 
MarylandMark said:
It does or better way to say it is that it can. My outboards don't like ethanol at all and there aren't any stations that sell non-ethanol fuel in my area.
Click to expand...

i only run non-eth or valve tech (sp?) fuel in my center console w/ 300 verado's, and change the fuel filters every 25 hours. they tell me it's very hard on the 'floats?????'


joe
 

Attachments

  • engines mounted.jpg
    engines mounted.jpg
    90.9 KB · Views: 7
Wrinkleface said:
Didn't Chris w/ that Bad Azz 40 blue/silver & the 1500 Sterlings have a bunch of issues because of tank stuff?????:confused:
Click to expand...

it wasn't due to ethanol..... however, i will say this ------ i personally saw a 'peanut' come out of one of the filters..... seriously!!!!!

on mine, the tops/cap (or whatever it's called) wasn't sealed well on my tanks, and chris' had a similar problem. not a big deal.. easy fix...


joe
 
You must log in or register to reply here.

Similar threads

Serious News
Love at First Sound, Bertram 31
Replies
0
Views
317
Serious News
Serious News
Serious News
Mildura 100 race to run without waterskis amid sporting suspension
Replies
3
Views
357
rschap1
rschap1
Serious News
Boat-Maker Brunswick Looks to Control Costs as Demand Softens
Replies
1
Views
810
Ratickle
Ratickle
Speed on the Water
Image Of The Week: How Do You Get An MTI Guy Into A Skater?
Replies
1
Views
1K
Ratickle
Ratickle
Serious News
Supersede launches marine-grade plywood replacement
Replies
2
Views
145
rschap1
rschap1
Back
Top